Scientific Journal of KubSAU

The article presents analysis of the problem of increasing the quality of the implementation of mechanized operations to harvest crops and seed dressing chemicals. The quality of grain harvesting combine harvesters was considered for the new modern harvesters in terms of crop losses, grain crushing and microdamages. The quality of seed treatment is considered on the basis of the ejection slot-spraying nozzles at ultra low seed coming down with a conical distribution surface, ending rounded shape logisticians. The problem of improving the quality of the grain harvest is mainly due to its losses for the combine and injury. By the way, the amount of grain crushing almost half its losses determines the percentage of the combine. The greatest fragmentation occurs in the threshing and separating device (LSG) combines with a hammer drums and several times lower - in the axial rotor LSG. At last there is a big advantage - high performance combines that preference when replacing obsolete machines with a hammer apparatus. Quality depends on the etching uniformity of distribution of atomized liquid droplets and completeness of etching. The proposed new flowsheet Dressers fixed flow distribution and ejection-slotted spray solution of the working fluid has significant advantages: reliable processing of seeds, completeness (not less than 97%) and uniformity (98%) of dressing material. Optimal duty cycle flow of seeds created by a fixed cone with an angle of 45 degrees, the spatial arrangement of ejection nozzles relative to the flow of processed seeds provide good quality of work