Scientific Journal of KubSAU

Based on the analysis of domestic and foreign scientific and patent literature, possible options to reduce weight of electro technical steel in magnetic circuits of electrical machines are explored. A search for the best options for the manufacture of magnetic induction motors stators technology aimed at improving the utilization of electrical steel and improving the energy performance of electric machines is carried out. All the variants are described and illustrated in detail in the drawings. It is pointed out the advantages and disadvantages of each method of manufacturing magnetic wires and the reasons why certain suggestions of technology of manufacturing magnetic circuits have not been implemented in mass production. The main indicators characterizing the manufacturability of constructive decisions are recommended. Economic indicators have been put in the basis of the choice of the optimal variant while designing the electrical machine. An optimal variant should be considered the variant in which all the technical requirements at lowest total cost are met. The latter should be understood not only the cost of materials and machine manufacturers, but also the cost of operation. The dependence of the energy performance of motors with modular designs of stators from the manufacturing technology is pointed out. The existing technology of the most mass electric motors series production, the following disadvantages are typical: low coefficient of utilization of electro technical steel; high specific material capacity, the cost of technology and labor intensity of production; low labour productivity and level of automation of technological process. Due to the fact that the possibilities of increasing of the machines’ specific weight characteristics due to the usage of new magnetic and dielectric materials are exhausted, it is advisable to change the technology of electric motors production, moving away from the traditional design

Based on the analysis of domestic and foreign scientific and patent literature, options for reducing the weight of electro technical steel in the magnetic circuits of electrical machines are explored. We have carried out a search for the best options of technology for the manufacture of magnetic cores of the stators of induction motors, aimed at increasing the utilization factor of electrical steel and improving the energy performance of electric machines. All options are described in detail and illustrated by drawings. We have listed the advantages and disadvantages of each method of manufacturing magneto-wires and the reasons why certain proposals of manufacturing technology cores have not been implemented in mass production. A variant of technology of manufacture of annular magnetic cores for mechanical induction electric motors is offered. The essence of mechanical design is to replace the laminated stator and rotor twisted from a strip of electrical steel, wound in the form of a ring with the simultaneous breaking-hell grooves with variable pitch under the stator windings and squirrel cage of the rotor coils. The effectiveness of the use of volute stator in mechanical electrical machines is confirmed in frequent controlled asynchronous torsion engine when tested pilot batch of the mechanical single-phase asynchronous motors for washing machines. This technology almost completely eliminates the problem of technological wastes of electro-technical steel regardless of the form of the stator bore (cylindrical, conical, flat end or flat line); it allows fully automate the manufacture of magnetic cores, greatly simplifies the stamps, makes them more durable

In this work, we consider the design and development of neural network software module for prediction of electricity consumption in the system of support of decision-making power control. Two prediction models support the software module: regression model and neural network model, based on multilayer perceptron. Software development to predict power consumption in the system of decision-making today is one of the priority directions in the Russian power industry. Therefore, the work associated with the development of methods and algorithms of forecasting of power consumption in the power sector, is surely relevant