Scientific Journal of KubSAU

Polythematic online scientific journal
of Kuban State Agrarian University
ISSN 1990-4665
AGRIS logo UlrichsWeb logo DOAJ logo

№ 152(8), October, 2019

Date issued: 31.10.2019

Physical Sciences and Engineering
3100 kb

PRODUCTION TECHNOLOGY OF PREPARATION OF SOIL BY TERRACING THE SLOPES

abstract 1521908001 issue 152 pp. 1 – 11 31.10.2019 ru 583
Slope land (ravines, gullies, mountain areas) for many countries of the world are important areas of economic activity, and for some they are the only living space. In the mountainous areas there are cereals and feed, fruit, citrus, nut, berry and essential oil crops, grapes, tea and many others. On slope lands, soil preparation by terracing is widely used. The article considers modern technologies and machines for the construction of terraces in order to create protective and fruit plantations on them and to involve new areas in agricultural turnover. There are two main ways to create terraces: hinged and rifled. Most often, when terracing on tractor-passable slopes, various plows and graders (floor terraces) are used, and on tractor-passable slopes there are universal bulldozers and terrasers (rifled terraces). The shuttle plow PCHS-4-35 and revolving plows are especially convenient for the device of floor terraces, with the help of which it is possible to significantly increase labor productivity by reducing the time for idle runs. For rifled terraces, we use a large complex of machines, the most productive of which are: terraser-Ripper TR-2A; terraced equipment TK-4; terraser T-4M, etc. The use of the proposed complex of machines in the construction of raised and rifled terraces will help to increase productivity and involve new lands in agricultural turnover, which will ultimately increase food security of the Russian Federation
430 kb

RECONSTRUCTION OF SMALL-SCALE FORMULA-FEED PLANT BY METHOD INTEGRATION INTO ITS COMPOSITION THE MODULAR PROCESS LINE FOR PROCESSING LOOSE COMPOUND FEED

abstract 1521908002 issue 152 pp. 12 – 23 31.10.2019 ru 797
The small-scale intra-economic plants producing loose compound feed are outdated and require reconstruction by method of the modern process lines of compound feed granulation or extrusion adding. But such reconstruction requires a production stop. It is unacceptable for agricultural enterprises. The method of small-scale intra-economic formula-feed plant reconstruction is offered. The method consists in integration into composition of the plant of a modular process line for loose compound feed extrusion or granulation without stopping of production. The building for a new process line is created from the constructive modules representing metal frames with overall dimensions of a standard cargo container in which the equipment, ready to application, is installed. The combined multilevel building of a process line for granulation or extrusion is placed near the main factory building of the existing intra-economic enterprise. Buildings additional and the main production lines form two multilevel production factory building. The example of small-scale formula-feed plant reconstruction by method of integration a modular process line for granulation is explained. The line consists of modules for operational storage and dispensing of loose compound feed, conditioning and granulation, cooling, separation of granules. The traditional formula-feed plant of the fixed structure turns into the transformed system because the configuration of the new modular line can be easily changed. The offered method of reconstruction is perspective for application on small-scale intra-economic formula-feed plants as allows to reorganize without stopping operating production preparation of compound feed according to the modern requirements, having increased its quality and period of storage. Period of construction of the plant decreases from several months to several weeks thanks to creation of the building of the new line from ready constructive modules
2177 kb

PNEUMATIC SLIT SPRAYER PARAMETERS STUDY

abstract 1521908008 issue 152 pp. 54 – 67 31.10.2019 ru 235
As a result of scientific analysis of the effective plant protection by spraying them with protective-stimulating liquids, the most progressive pneumohydraulic processing method was chosen, enabling the use of a wide mode range. The proposed pneumatic sprayer design can be used to equip sprayers, pollinators and combined units to perform basic operations with the use of pesticides and fertilizers. Using liquid crushing through exposure to working fluid flowing from the feeding tubes of sprayers (jets) with a high-speed air jet, it was possible to carry out the spraying process in a low-volume and ultra-small-volume way in a highly dispersive airborne jets. To study the air-borne jet parameters, providing the working fluid spraying quality as a polydisperse system, we have used a probabilistic-statistical analysis method. It studies variation range of signs according to the classes. Theoretically, the air-borne jet forming process by a pneumatic slit sprayer was considered. Using the three-factor central composite rotatable uniform plan (CURUP), the influence of three factors (surge tank position in cm, air pressure MPa and the feeding tube inclination angle in degrees) on the sprayer performance and the surface response on the working fluid median-mass diameter was determined. It was found that the response surfaces have a form of a paraboloid, the extremum of which is observed at an air pressure of 0.15 MPa (the center of the plan) and the tube installation angle in the spray housing equal to 60 degrees with the middle surge tank position. The maximum coating density of the treated object was 95 pieces / cm2 at the same position of the surge tank and air pressure in the pneumatic line of 0.3 MPa. It was proved that ultra-low volume spraying can be carried out in wide ranges of initial data while observing spraying quality requirements according to the drop median-mass diameter, the average coating density and their distribution uniformity
1139 kb

ENGINEERING OF TRANSPORT MACHINES SCREW ENGINES FOR RICE AND FISH FARMING FACILITIES

abstract 1521908012 issue 152 pp. 105 – 116 31.10.2019 ru 298
The article considers manufacturing techniques and assembling screw propellers of transport vehicles for rice and fish farms. The increase in technological capabilities, reliability and carrying capacity of transport vehicles is achieved by making the propeller screw, with the possibility of its rotation. We called such propellers screw propellers, since along their perimeter along the entire length, multiple-curved curved surfaces are formed in the form of helical grooves of various configurations, sizes and shapes. The spatial form of the screw propellers is made with screw surfaces in the form of helical grooves, which ensures that the transport machines for rice and fish farms are conveyed on land, on water, through swampy and difficult terrain at a sufficiently high speed. As a result of the work performed, not only the designs of screw propellers and their classification were proposed, in which there is a general principle that allows the development of still unknown structures of propellers, but also their manufacturing techniques. The design of screw propellers was performed using the KOMPAS-3D software package using descriptive geometry and engineering graphics
295 kb

THEORETICAL PROVING THE PARAMETERS OF A UNIT FOR SEEDLING FEEDING TO TRANSPLANTING DEVICE

abstract 1521908014 issue 152 pp. 129 – 140 31.10.2019 ru 245
Transplanting seedling into the field is an extremely important period for all seedling crops, as the plant passes through basic vegetation stages. After carried analysis of seedling transplantation machines utilization it became obvious that they all have low technical and exploitation parameters. The purpose of the research was elaboration of theoretical bases for calculating parameters of a unit for seedling feeding to transplanting device, which implementation will lead to increase efficiency of transplanting. The article presents the results of theoretical researches for proving parameters of a unit for seedling feeding to transplanting device. A system of equations for acting at seedling forces during its transportation from collecting drum to feeding drum is arranged. We have also calculated nomograms for defining drum rotating frequency depending on seedling friction coefficient on surfaces of collecting and feeding drums. Parameters of pneumatic feeding drum were technologically proved. Its principle is equality of capacities of feeding unit and transplanting device. We have elaborated a nomogram for defining feeding drum rotating frequency depending on plant spacing and velocity of transplanting machine
153 kb

SYSTEM FOR THE PROCESSING OF MANUR IN LIQUID FERTILIZERS FOR DISPOSAL BY IRRIGATION OF AGRICULTURAL CROPS

abstract 1521908017 issue 152 pp. 211 – 219 31.10.2019 ru 235
The modern level of cultivation of agricultural animals requires new approaches to the processing and disposal of manure. To do this, it is necessary to develop effective ways of converting waste into organic fertilizers, which, in the form of liquid effluents, make it possible to enhance and preserve the soil fertility of agricultural landscapes. This is especially necessary to be carried out on black soils, where irrigation of crops with prepared and diluted drains has a positive effect on the harvest. Therefore, the creation of manure processing systems by technological sequentially related operations is an urgent problem. Cattle manure is considered as a poly-dispersed system with sedimentation and physical and chemical properties. In this case, the system requires the sequential solution of a number of complex tasks: removal of various inclusions from manure, especially colloidal and fibrous particles; prevention of premature separation of manure during homogenization; preparation of manure for separation into liquid and solid fractions is a basic technological scheme that is universal and applicable to all types of livestock-raising complexes. A feature of the integrated cattle manure disposal line is a lagoon for year-round storage of a certain amount of manure drains prepared for irrigation during the growing season. For the creation of the lagoon, a film coating is used - it works as an anti-filtration screen
2373 kb

THE RATIONALE OF THE RIGID CHARACTERISTICPARAMETERS OF THE COMBINE HARVESTERS OF HIGH PERFORMANCE

abstract 1521908022 issue 152 pp. 257 – 274 31.10.2019 ru 227
The purpose of the study was to substantiate the rigid parameters of tyres in propulsion units for the combine harvesters of high performance. A research method is analytical with the use of a mathematical model of the combine harvester in which damping and rigidity of the drive axle tyres in circumferential and radial directions are taken into account. Values of the rational rigid characteristics of the pneumatic tyre have been generally determined by the ability of the tyre to be deformed so that to reduce the angular, vertical and horizontal skeleton oscillations of a combine harvester to ensure the high-quality technological process of the threshing and harvesting. The specified circumstance gains the special importance at the development and introduction of the new tyre modes for the combine harvesters of high performance. The analysis of the conducted analytical researches has been showed the expediency of using the threads of a cord in the propulsion unit of combine harvesters instead of diagonal or radial tyres of the same standard size with an original position of them. The offered pneumatic tyre of 30.5E-32 used as the leading one, and promotes the reduction of the angular oscillation amplitude and operating speed of a combine and also angular and vertical accelerations up to 1.42 times
1034 kb

THEORETICAL JUSTIFICATION OF CONSTRUCTIVE AND REGIME PARAMETERS OF THE ARABLE AND MILLING UNIT

abstract 1521908023 issue 152 pp. 275 – 287 31.10.2019 ru 341
Pre-planting preparation of soil in the Central part of the North Caucasus according to the traditional technology of cultivation of crops involves the use of single-operation soil processing machines and aggregates. As a result, they have to make multiple passes, resulting in increased energy consumption, soil compaction, and the emergence and development of erosion processes. In addition, the agricultural machinery used is characterized by the low operability and reliability of the working elements and their joint assemblies, which leads to a decrease in productivity, so that the agricultural requirements for the process of pre-sowing soil preparation are often not met. In order to solve the above-mentioned problems, an arable milling unit for pre-sowing soil preparation is proposed. Its structural and technological scheme is justified. The distinctive features of the proposed design are the possibility of the main soil treatment with simultaneous grinding of large soil clumps, lumps, plant residues and levelling of the soil surface; possibility of changing the installation angle of the rotary grinder and depth of soil treatment depending on the type of treated soil; high quality of soil preparation for sowing; provision of energy consumption reduction due to combination of technological operations in preparation of soils for sowing; lack of expensive assemblies and parts; the need for less energy for aggregation when preparing soils for sowing. As a result of the theoretical studies carried out, rational values of the main parameters of the proposed arable milling unit have been established, which have a decisive influence on the process of its operation: speed of movement 1.5... 2.0 m/s; Angle of attack of working element 20... 300; Angular rotation speed of the working tool 20... 25 s-1
Life Sciences
264 kb

INFLUENCE OF THE DENSITY OF STALKS OF WINTER BARLEY VARIETIES ON THE FORMATION OF SOWING QUALITIES OF SEEDS

abstract 1521908005 issue 152 pp. 35 – 44 31.10.2019 ru 244
The quality of the seed largely depends on the value of the future crop. For sowing, it is necessary to use seeds with high sowing qualities. This article is devoted to the study of the formation of high-quality seed of new varieties of winter barley, depending on the controlled compaction of crops. The paper describes in detail the importance of sowing qualities of seeds for the formation of high productivity of barley crops. The questions of influence of different seeding rates on laboratory and field germination of seeds are considered. The correlation between the four variants of seeding rates and field and laboratory germination was determined. The purity of seeds of winter barley varieties Kubagro – 1 and Kubagro – 3 was studied and it was determined that the change in the density of the formed stem does not affect the purity of seeds of these varieties. The use of highly productive seeds for sowing and further qualitative cleaning of the obtained grain contributes to the production of seed material with high purity. When considering the weight of 1000 grains in the studied varieties, it was determined that with an increase in the number of productive stems per unit area and a decrease in the area of plant nutrition, both varieties reduced the mass of grains. The highest rates of weight of 1000 grains were determined when sowing with the norm of 3.5 million germinating seeds per 1 ha, such a pattern was observed for both varieties
134 kb

BREAD-MAKING FROM MIXES OF HIGHEST QUALITY WHEAT FLOUR, WHOLEMEAL FLUOR FROM HULLESS GRAIN OF BARLEY NUDUM 95 AND WHOLEMEAL FLUOR FROM TRITICALE GRAIN OF CECAD 90

abstract 1521908007 issue 152 pp. 45 – 53 31.10.2019 ru 216
As a prospect in baking, a number of researchers propose to expand the range of products in the formulation of which include natural food dressers. The article presents the results of research on the development of the optimal formulation of bread from mixtures of wheat flour, wholemeal flour from grains of naked barley varieties Nudum 95 and wholemeal flour from grain triticale varieties Tsekad 90. To select the optimal mixture of wheat, barley and triticale flour, the following variants of the ratios were studied– 70:10:20; 60:20:20; 50:30:20; 50:20:30. As control we took flour of the highest grade from grain of strong wheat Novosibirsk 29. Flour mixtures studied by the gluten content is significantly inferior to the control version of the flour. In the version where 70% of wheat flour was used, gluten decreased by 5.1%, in the version with the amount of wheat flour 60%, gluten decreased by 8.0%. In subsequent variants, the difference in gluten content with the control variant was more than 10%. The lowest rate of flour strength (145 e.a.) in the version where barley flour reached 30% of the mixture. In other embodiments, the flour strength level 209-250 e.a., that is slightly different from the standards on valuable wheat (not less than 260 e.a.). In terms of baking quality has distinguished the case where the proportion of wheat flour was 70%, barley – 10% and triticale – 20% (the volume of bread 500 ml, total score of bread 4 points). In subsequent versions, the performance of baking qualities decreased. As a result of evaluation of mixtures of wheat, barley and triticale flour revealed the most optimal ratio – 70:10:20. This option is recommended for introduction into production for enrichment of wheat flour with nutritious components of barley and triticale grain
121 kb

REGIONAL DEVELOPMENT OF SUGAR BEET BREEDING

abstract 1521908010 issue 152 pp. 77 – 84 31.10.2019 ru 174
This article discusses the stages of sugar beet-root breeding work, evaluation of the results of competitive tests, genetic potential productivity of hybrids, identifying productive forms of sugar beets, research techniques and production testing sugar beet hybrids, the main achievements of Pervomaiskaya FGBNU breeding and experimental station of sugar beets
218 kb

MOLECULAR GENETIC ASPECTS OF PERSIMMON (DIOSPYROS L.) BREEDING

abstract 1521908011 issue 152 pp. 85 – 104 31.10.2019 ru 192
Persimmon is the most cold-resistant subtropical culture. It is relevant in scientific research and a prospect for the application of modern methods in plant breeding. The aim of this work is to review the latest advances in molecular genetic methods in persimmon breeding (Diospyros L.). The article shows the importance of studying the molecular genetic basis of persimmon breeding as a necessary condition for the development of new approaches in the production of new varieties. Statistics on the cultivation of this crop on an industrial scale is presented. The importance of culture is shown and given information on the territory of cultivation. Data on the study of genetic diversity, assessment of genetic stability, understanding the origin of persimmon varieties, degree of relationship using a number of molecular markers are presented. There are also DNA sequencing results, which are shown closely related relationships of Diospyros kaki with wild species D. oleifera, D. deyangensis, D. virginiana, D. glaucifolia, D. lotus and D. jinzaoshi. The reduce the astringency of the fruit, the significant role of regulation of structural genes (DkADH, DkPDC, DkPK, ALDH) in the biosynthesis of proanthocyanidins, in increasing the tolerance of plants to abiotic and biotic stress factors, level of expression of the studied genes are presented in this review
1266 kb

THE IMPACT OF PHOTOSYNTHETIC ACTIVITY OF EARLY POTATO SOWING IN CROP FORMATION IN THE CONDITIONS OF THE SOUTH OF KYRGYZSTAN

abstract 1521908013 issue 152 pp. 117 – 128 31.10.2019 ru 201
This article presents the results of studies on the impact of the fertilizer application rate and the use of the growth stimulant called Bereke GN on photosynthetic activities of early potatoes in southern Kyrgyzstan. Due to the lack of scientific evidence on the integrated use of fertilizers and growth stimulants in conditions of southern Kyrgyzstan, we considered it necessary to clarify the methods and standards for the use of the Bereke GN growth stimulant in the production of early potatoes in lowland areas on typical gray soil. In southern Kyrgyzstan, similar research in early potato technology is being carried out for the first time. According to studies, the crops of early potatoes possessed high leaf surface, which were subjected to complex treatment of the Bereke GN growth stimulator, accordingly its value was in the flowering phase of 41.2- 48.2 thousand m2. When the nutrition increases, a more powerful assimilation surface is formed. The highest level was 48.2 thousand m2 per 1 ha under the complex treatment with growth stimulator. The formation of tuber mass on 1 bush with the complex use of the Bereke GN growth stimulant showed a high intensity. With an increased nutrition, the Berke GN Growth Stimulator Integrated Test Variant increased the tuber formation rate, respectively the value was 182 g/bush. According to studies over the years of the experiments, the amount of dry biomass crops increased naturally, depending on the application of fertilizers and the use of the growth Bereke GN stimulant
154 kb

EFFICIENCY OF HERBICIDES APPLICATION ON WINTER WHEAT CROPS

abstract 1521908016 issue 152 pp. 200 – 210 31.10.2019 ru 175
To increase productivity and quality, as well as to reduce the cost of production of winter wheat in the Central irrigated zone of the Rostov region is of great importance to find the most effective methods of agricultural culture, in particular, the protection of crops from weeds. The work determines most effective herbicides for pre-germination use against annual dicotyledonous, including resistant to 2,4-D and MCPA, and some perennial root-spray weeds in the Central irrigated zone of the Rostov region. The efficiency of different terms of application of the herbicide called Ballerina on winter wheat crops in the Central irrigated zone of the Rostov region was studied. The greatest biological effectiveness of herbicides is provided by spraying winter wheat crops in the tillering phase with Ballerina herbicide with the norm of 0.3 l/ ha. We have discovered low biological effectiveness of Gerbitox herbicide against Matricaria inodora (L.), Fumaria officinalis (L.), Artemisia vulgaris (L.) and Cirsium arvense (L.). Best experience quality indicators of winter wheat grain were observed in the variant with the lowest contamination of crops when spraying in the phase of tillering a Ballerina herbicide 0.3 l/ha. The content of trash was 7.1%, nature 790 g/l, gluten content of 26.4 %, group 2 quality, and the commodity class – 3. Good quality indicators were also observed in the variant with Ballerina herbicide treatment of 0.5 l/ha in the tube exit phase. The highest level of profitability was obtained when spraying winter wheat crops in the tillering phase with Ballerina herbicide 0.3 l / ha-116%, and the lowest on the control was without treatment with herbicides - 74%
148 kb

JUSTIFICATION OF THE OPTIMAL PARAMETERS OF THE RESOURCE CAPACITY OF INDUSTRIAL AND TECHNOLOGICAL PROCESSES IN INDUSTRIAL FRUIT AND THE LIMITS OF STABILITY OF AGRICENE IN TECHNOLOGICAL EXPOSURE

abstract 1521908019 issue 152 pp. 231 – 239 31.10.2019 ru 156
An integral assessment of the resource intensity of production and technological processes in industrial fruit growing is given. The limits of the stability of fruit agrocenoses under technogenic impacts are substantiated. Regressive dependencies were established for technological processes in the context of certain types of resources used: capital (depreciation), working capital (consumption of materials and the coefficient of consolidation) and labor (wage intensity). The optimal parameters of resource-intensiveness of production and technological processes in industrial fruit growing are substantiated
140 kb

IMPACT OF NUTRITION BACKGROUND AND METHODS OF USING BIRCH GROWTH STIMULATOR ON EARLY POTATO YIELD IN SOUTHERN KYRGYZSTAN

abstract 1521908020 issue 152 pp. 240 – 248 31.10.2019 ru 201
This article reviews the results of studies on the impact of the nutrition background and the use of the Bereke GN growth stimulator on the yield and quality of early ripe potato variety Marabell in southern Kyrgyzstan. Early potato yields were largely dependent on the use of the Bereke GN growth stimulant. The highest yield was identified with the integrated use of a growth stimulator provided the planned yield, and averaged 29.97 t/ha. Also, in the experiments conducted, the yield of early potatoes was largely dependent on the climatic conditions of the year under study. The structure of the crop of early potatoes has been analyzed. In case of complex application of growth stimulator, also in case of treatment of seed tubers with growth stimulant, thickness of early potato plants is increased and on average in three years there was an increase by 0.32 and 0.52 thousand bushes per 1 ha. The structure and marketability of the early potato harvest were analyzed in detail, depending on the background of nutrition and the method of application of the Bereke GN growth stimulator
121 kb

GROWTH- REGULATING ACTIVITY OF NAFTALINSULPHONYLAMIDES AND PYRAZOLOPIRIDINES DERIVATIVES ON TOMATO PLANTS

abstract 1521908021 issue 152 pp. 249 – 256 31.10.2019 ru 190
The growth-regulating activity of naphthalenesulfonylamide and pyrazolopyridines derivatives was studied under laboratory and field tests on tomato plants. We have found substances with high growth-regulating effect. The vegetative mass of plants, the number of ovaries in the hand, the size of the fruit, the yield and the sugar content of the fruits increased under the influence of the growth regulators
140 kb

ORGANOLEPTIC ANALYSIS AS AN INSTRUMENT OF CONFECTIONARY SUNFLOWER PRODUCT QUALITY INCREASE IN PROCESS OF SELECTION AND INITIAL SEED GROWING

abstract 1521908025 issue 152 pp. 297 – 305 31.10.2019 ru 192
The article considers the introduction of organoleptic analysis of seeds into the line of first seed growing as a new method of increasing the consumer qualities of confectionary sunflower varieties. The carried-out researches allow making conclusions that it is necessary to use the nurseries of seed assessment not only for preservation and improvement of economically valuable signs of confectionary varieties but as well as for perfection of consumer qualities of manufactured raw materials in the process of selection-seed growing work with confectionary sunflower. The offered technology of organoleptic analysis was approbated in the department of science in Ltd Company SSE “Genofond” and is successfully used in the selection-seed growing program
Life Sciences
160 kb

CHARACTERISTIC OF COMPLEX FEED ADDITIVES FOR CATTLE CONTAINING PROBIOTIC MICROFLORA

abstract 1521908004 issue 152 pp. 24 – 34 31.10.2019 ru 766
The article provides an overview of domestic and foreign patent information on existing recipes and methods for producing complex feed additives containing probiotic microflora for cattle. Introduction of probiotic cultures of microorganisms to feed additives, along with biologically active substances, allows us to influence the processes of microbiocenosis of the intestines of animals, and, therefore, digestibility and digestibility of feed, which, in turn, leads to an increase in animal productivity. In addition, probiotic cultures contribute to the biodegradation of mycotoxins, which helps prevent mycotoxicity of animals. The most popular in modern livestock breeding are complex feed additives with broad-spectrum probiotic preparations, performing various biological functions
340 kb

ALTERNATIVE PROTEIN SOURCE IN FOOD INDUSTRY

abstract 1521908009 issue 152 pp. 68 – 76 31.10.2019 ru 611
This article deals with the problem of producing protein using alternative sources of raw materials, due to the shortage of feed protein and utilization of organic waste. This property makes it possible to return feed protein to farm animals and birds derived from the biomass of insect larvae. The invention relates to agricultural production. The studied problem is relevant for the technology of livestock products (agricultural sciences), which is explained by the global need for proteins and food products. The object of study is several different insects. The article studies the application and significance of some beetles in this field. The study provides a comparative analysis of the Black Linki (Hermetia illucens), House Cricket (Acheta domesticus), Locusts (Locusta migratoria), Flour Castaneum (Tribolium confusum) for a more graphic comparison of the benefit from the application of the above bugs and identify the most unpretentious and best beetle for breeding for food purposes in agricultural production. The work also shows a diagram of the process of development of the larvae of Hermetia illucens. The following research methods were used: observation, collection of scientific and practical information about beetles, study, analysis, processing, systematization of the collected material
843 kb

COGNITIVE VETERINARY – DIGITAL SOCIETY VETERINARY: THE DEFINITION OF BASIC CONCEPTS

abstract 1521908015 issue 152 pp. 141 – 199 31.10.2019 ru 261
There are many opinions on the question of what kind of society we live in at the beginning of the XXI century. Previously, it was believed that this is a post-industrial society. There was even an opinion that it would be a society of developed socialism or even a communist society. After that, the opinion on this has changed. First, modern society was called the information society, and then the society based on knowledge. The latest news in this area is that it seems that modern society is a digital society, that is, a society, based on digital technologies, digital communications, digital information processing and transmission technologies, as well as digital artificial intelligence technologies. In a digital society and science people must move to digital intelligent research technologies. In particular, the question arises as to whether veterinary medicine in a digital society should not also become cognitive veterinary medicine. This work is devoted to a detailed and reasoned (according to the authors) answer to this question. The methodology and terminology in this new field is not yet established and is not generally accepted. Therefore, in this work a lot of attention is paid to the logic and methodology of scientific knowledge, terminological issues and definitions of concepts
178 kb

CHARACTERISTICS OF NUTRITION AND HEALTH OF DOMESTICATED DOGS AND CATS

abstract 1521908018 issue 152 pp. 220 – 230 31.10.2019 ru 226
The authors of this article have developed a questionnaire for pet owners and conducted a research on the nutrition and health of domestic dogs and cats in the urban environment. By results of researches, it is concluded that in the conditions of the city, cats are a preferable type of pets. The preferred type of food is mixed one, with using dry, natural and wet food. Food standards are followed by 46% of owners of 100% participants of the survey and only 43.3% from consulters with veterinary specialists in the field of feeding of a pet. Among non-communicable diseases, urological diseases are more common: urolithiasis, cystitis, endometritis and ovarian cyst
132 kb

GROWTH AND DEVELOPMENT OF HOLSTEIN HEIFERS BORN WITH THE USE OF EMBRYO TRANSPLANTATION

abstract 1521908024 issue 152 pp. 288 – 296 31.10.2019 ru 227
The article gives results of a comparative study of the growth and development of young cattle of Holstein breed belonging to the Reflection Sovering and Vis Baidial lines, born with the method of transplantation of embryos, and their coevals born with a standard method. Technology of growing of young cattle in both groups was identical, accepted in the economy. During suckling period, the heifers got 300 kg of full-milk. During a period from 3 to 8 months, they were contained in cages for small group maintenance, from an 8 month age, they were contained loose, on pasture grounds. Living mass and average daily increases of experimental heifers changed differently. The rates of height and average daily increases in an experimental group turned out to be higher, than for coevals of the control group. It is proved by the researches, that heifers born with the method of transplantation of embryos are equal to ones who were born with a traditional method in the rates of height and development and even excel coevals at the certain periods. In the age of the first insemination, living mass of heifers of the experimental group was 365 kg, which was 14 kg more compared to coevals of the control group. In all studied age-related periods, heifers of the experimental group excelled coevals of the control group in average daily increases. From their birth and up to 14-th month age, exceeding on increases was 37gr; to the age of the first insemination, heifers of the experimental group were more developed. Taking into account the genetic potential in heifer embryos and their best height and development, it proves the expediency of the use of transplantation of embryos
.