Scientific Journal of KubSAU

The possibility of using involute sprockets, more technologically advanced in manufacturing, compared with sprockets with straight, convex-concave profile of the lug on the criterion shock resistance circuit, the maximum permissible speed of the drive sprocket for bush roller chain drives and gears with a toothed chain. The comparative analysis of researches of operation of roller and tooth chain gearings with various steps and types of profiles of sprockets showed that in all cases with increase in a step of a chain the coefficient of speed of blow increases, and the increase in number of lugs at sprockets reduces the speed of blow of the hinge about sprockets tooth. Value of coefficient of speed of blow for couple an evolvent sprockets - a gear chain is much less than value of coefficient of speed of blow for couple a plug-roller chain –sprockets of any profile. Less noise during the work of tooth chain gearings is due to evolvent sprockets. As a result of researches it is established that on kinetic energy of impact of sprockets and the hinge of a chain, sprockets with an evolvent profile can be applied on an equal basis with the sprockets having concave-convex or rectilinear profiles of lugs. Respectively, evolvent sprockets can be used both in chain transfers with roller and with gear chains

The article presents a new design of the drive which includes chain and toothed developed geometric and kinematic calculations. Feature of chain gears is that the sprocket pins have involute profile. The drive has a high load capacity, higher kinematic accuracy with reduced dynamic loads