Scientific Journal of KubSAU

Polythematic online scientific journal
of Kuban State Agrarian University
ISSN 1990-4665
AGRIS logo UlrichsWeb logo DOAJ logo

№ 151(7), September, 2019

Date issued: 30.09.2019

Physical Sciences and Engineering
190 kb

PROCESS EVALUTION OF SEEDS PRE-SEEDING TREATMENT WITH INFRARED RADIATION

abstract 1511907001 issue 151 pp. 1 – 14 30.09.2019 ru 227
The main subject spotted in this article is a calculation method which helps to depict optimal temperature conditions for seeds stimulation by infrared radiation useful for electromagnetic processing and seed-pelleting with perlit next. The analysis helped to depict that the convenient technical aspects of shortwave infrared radiation is in range 0,76-1,4 mcm. This kind of infrared radiation has the greatest penetrating power into the grain to stimulate. According to the methodology a rapid increase of the temperature of seeds after the critical point reaching during IR treatment leads to the properties deterioration of the of thermolabile materials. The temperature gradient during the IR treatment of seeds has the opposite direction of moisture content and depends on the preliminary humidity of the material. This affects the pre-planting cultivation quality of seeds. To avoid overheating and seeds damage there was a mathematical model of the optimal temperature of the IR radiation calculated. As the result of this method there was obtained the calculation of temperature conditions for IR treatment and heating rate depending on seeds humidity. This calculation method helps to define optimal temperature conditions to avoid harmful influence on seeds due to heating. There was data fitting during this method creation and evaluation which defines the effectiveness and perspective of this elaboration
658 kb

PRINCIPLE OF DIFFERENTIAL THRESHING DEVICE OPERATION

abstract 1511907003 issue 151 pp. 24 – 32 30.09.2019 ru 246
Planetary mechanisms are used to create the working movement of the Executive bodies of metallurgical and mining machines. Roller working bodies, for the drive of which planetary mechanisms are used, are increasingly being used in the designs of harvesting machines. The processes occurring in the differential threshing devices of harvesting machines are poorly understood, due to the lack of information about the properties of the material in the event of rapidly changing stresses in them. This work is the result of the analysis of previous theoretical as well as experimental studies in the field of threshing. We describe the technological scheme of the shock-vibration threshing device and the principle of its operation. The possible variants of arrangement of drum rolls and drumming are considered. The relationship between the angular velocities of the drum, the drum rolls and the sub-drum is elucidated. Installation of three-sided rollers on the threshing device according to the scheme proposed by us allows additional shaking of the whole threshed rice mass from 75 to 110 times per second
389 kb

COMPARATIVE ANALYSIS OF THE DE-FORMATION IN TIRES 30.5-32 WITH A DIF-FERENT INTERNAL STRUCTURE

abstract 1511907011 issue 151 pp. 116 – 129 30.09.2019 ru 296
The objective of the research was to study the patterns of deformation with the different internal structure in a tire envelope with the standard size of 30.5-32 in propulsion units for modern mobile farm vehicles. The research method is experimental with the use of «a tire tester» and specially developed devices for determining the deformations of the tire envelope concerning the rim in circular and radial directions. Output indicators of a wheel with the pneumatic tire are determined by the ability of the tire to be deformed so that at small hysteresis losses in the rubber-cord envelope the largest area of the contact with a substructure have been created. This circumstance has special significance when developing the tires for mobile farm vehicles with the high power saturation, the patterns of deformation of which are poorly studied now. The analysis of the carried out experimental researches has shown the expediency of application of the experimental tires with the same standard size, offered in the work, on the propulsion units of the mobile farm vehicles instead of diagonal and radial tires. The rolling resistance of the experimental tires 30.5E-32 is lower than the rolling resistance of serially produced tires, and the developed area of contact is higher and that provides the decrease in the condensing impact on the soil
269 kb

ROBOTIC MEANS IN THE PREPARATION AND DISTRIBUTION OF PROTEIN FEED IN AGRICULTURAL COMPANIES

abstract 1511907019 issue 151 pp. 221 – 231 30.09.2019 ru 199
The purpose of this research is to increase the production of concentrated (protein) feed in agricultural enterprises through the use of electronic equipment or robotics and precise precision livestock technology, which will reduce the unit cost of their production. According to the academician L. P. Kormakovsky, accurate, precision technology enables economical use of material resources, which are feeds and their ingredients in the feed, and to obtain optimum results at the highest cost. The most important direction of development of accurate technologies in animal husbandry is the preparation of complete feed mixtures and normalized feeding of groups of animals formed by its productivity. One of the key conditions of efficiency of precise breeding and the use of sophisticated electronic means of control of technological processes is the quality of the feed. Over the past 15 years, concentrated feed forms have been the basis of the diet of most types of farm animals and is the main reserve for increasing their productivity. The article considers models of robotic means of different countries of producers, used in agricultural enterprises for the preparation and distribution of protein feed. The use of robotics currently makes it possible to facilitate human work, and in some cases to replace it. Replacement of a human in all the spheres of activity, for example in preparation of protein forages, at agricultural companies will allow to increase productivity of forage preparation equipment, quality of forages and to provide agriculture of the country with the domestic forages. However, the production of domestic robotics, which are designed for the preparation of protein feed on the basis of oilseeds (sunflower meal, soybean, etc.) is absent, which is a scientific problem. The production of robotics is most developed in European countries. Robotic means which carry out distribution of protein forages, are applied to a lesser extent at the domestic agricultural enterprises, in connection with their features
548 kb

THEORETICAL JUSTIFICATION OF CONSTRUCTIVE AND REGIME PARAMETERS OF THE UNIT FOR PROCESSING OF ROW-SPACINGS AND TRUNK STRIPS OF FRUIT PLANTINGS

abstract 1511907020 issue 151 pp. 232 – 243 30.09.2019 ru 382
Reserves of expansion of the areas under fruit plantings in the central part of the North Caucasus are limited, one of solutions of this problem is involvement in an agricultural turn and, in particular, under fruit plantings a little or the slope lands, absolutely inconvenient for one-year cultures, having optimum climatic conditions. Currently, scientifically based technologies of cultivation of gardens on slopes are developed for foothill and mountainous areas of the North Caucasus in relation to zones. Large corporations, as well as medium and small business are engaged in production of fruits in the North Caucasian Federal District. One of problems which vendors of fruits face it is the shortage of the equipment on care of trunk strips and row-spacings of fruit plantings. Mechanized technologies of flat gardening are a little effective in specific conditions of mountain and foothill agriculture where the main limiting factor is the soil fertility. At the same time, the question of the accelerated creation of a humic layer in the trunk strips, improvements of the water and food modes of fruit plantings on slope lands is particularly acute. The carried-out analysis of a system of maintenance of the soil in gardens showed that the most rational is the cespitose and humous system providing bevelling of vegetation with its leaving on the surface of the soil in the form of mulch. However, lots the mower-grinders produced by the industry have rather low rotating speed of a rotational operating part (540 … 840 min-1); they do not provide high-quality crushing of grass vegetation, are incapable to transport crushed grassy masses in trunk strips of fruit-trees. In this regard, we offer a construction of a unit for processing of row-spacings and the trunk strips of fruit plantings. As a result of the conducted theoretical researches, we have set rational values of key parameters of the offered unit
Life Sciences
138 kb

RICE QUANTITATIVE TRAITS CONTROLLING YIELD AND THEIR INHERITANCE

abstract 1511907002 issue 151 pp. 15 – 23 30.09.2019 ru 193
Rice is a crop with high yields guaranteed by nature itself. In recent years, huge changes have occurred in the domestic rice cultivation, but despite this, there are still a lot of unsolved relevant problems. One of such problems is the development of high yielding varieties. The success of breeding largely depends on the availability of genetically diverse starting material with a wide response to changing environmental conditions, its knowledge and proper selection; as well as the identification of new sources of valuable traits and properties, among ecologically remote agro-types that enrich the genetic potential of domestic varieties. Development of a high-yielding variety is greatly influenced by economically important traits: plant height, total and productive tillering, the number of spikelets and grains in the panicle, grain size, weight of 1000 grains, etc. In modern biological science of heredity, there is still the question of the inheritance of quantitative traits. The study of inheritance of quantitative traits constituting the main elements of the yield structure is one of the most important tasks, the solution of which is necessary to speed up the breeding process. Inheritance of any trait is often determined by researchers by the magnitude of the dominance coefficient
236 kb

APPLICATION OF HYDROCARBON SUB-STANCE OF GROWTH AT CULTIVATION OF CROPS

abstract 1511907004 issue 151 pp. 33 – 45 30.09.2019 ru 216
In this work we have given the analysis of the literary data confirming positive experience of impact of the hydrocarbon substance of growth (HSG) on viability of seeds, resilience, growth of plants, and productivity of various crops. It is shown that the basic experimental data belong to the 60th of the XX century. At the same time, works on application of HSG have been generalized for the first time in the collection of works of the Academy of Sciences of the Azerbaijani SSR by Institute of soil science and agrochemistry. HSG represents the by-product of petro processing received at sulphuric acid cleaning of diesel fuel with further processing with alkaline solution of NaOH. It includes mainly mixture of sodium salts of naphthenic acids. On the basis of literary data and own probes it is established that for each culture there is optimum very small concentration of HSG (0.005-0.01%), processing by solution of which makes positive impact on viability, growth and development of crops. The results of probes of blood formation of animals [8] and growth of mass of birds allow considering HSG ecologically safe. We have also presented the results of pilot study of impact of pre-seeding processing of seeds of wheat and peas by water solutions of the hydrocarbon growth substance (HSG) on their morpho-physiological parameters. The most effective concentration of HSG for processing of seeds of spring wheat of grade "Saratov" and grade peas "Alpha" is revealed. It is shown that the stimulator in concentration of 0.005-0.01% proves as stimulator of crop growth. It follows that degree of efficiency of action of HSG on improvement of development and increase in productivity of agricultural products from use of this drug is quite high. Considering that the stimulator can be received at insignificant expenses as a waste product of the purified diesel fuels, its application in agriculture is economically justified
116 kb

FEATURES OF GROWING AND FERTILIZATION OF PERSPECTIVE VARIETIES OF APPLE-TREES IN THE CONDITIONS OF THE SOUTHERN REGION OF RUSSIA

abstract 1511907006 issue 151 pp. 56 – 61 30.09.2019 ru 192
For the effective development of modern industrial gardening, it is necessary to maximize the use of the biological potential of cultivated varieties of fruit crops. In order to identify the most valuable for use in breeding and production of varieties and elite forms of apple regional and foreign selection studied the features of growth and fruiting of apple genotypes. The objects of study are 14 varieties and 2 elite forms of apple. In the work, programs and methods of selection and sorting studies that are generally accepted and developed with the participation of employees of the FSBSI NCFSCHVW were used. According to the results of many years of research, low-growing apple varieties that are promising for breeding and production have been identified: the Golden Crown, Carmen, Favorite Dutovoy, Red Chif, Sunrise, Novella, Talisman, and the elite form 12/2-20-35. Low-growing varieties with a convenient vertical crown are distinguished: Carmen, Favorite Dutovoy, Red Chief. Selected varieties of regional breeding: immune to scab Carmen and highly resistant to scab Favorite Dutovoy, possessing a complex of significant features: fruitful, low growth, with a vertical form of crown as the most valuable for use in breeding and production
162 kb

THE EFFECT OF SOWING DATE ON YIELD OF WINTER BARLEY IN THE CONDITIONS OF THE NIZHNY NOVGOROD REGION

abstract 1511907007 issue 151 pp. 62 – 72 30.09.2019 ru 214
The article studies the influence of the different time sowing periods of Volzhsky First winter barley variety on the grain yield and the elements of its structure in the conditions of LLC “Vpered” of the Spassky district of the Nizhny Novgorod region on light gray forest soil. The research was being conducted from 2015 to 2018. The barley was sown in four periods: from August 20 to September 19 (with an interval of 10 days) with the clean fallow as its predecessor. We used the seeding rate of 2.5 million seedlings per hectare. The maximum grain yield of the winter barley was 3.94 t / ha. This corresponds to the sown date of August 20, the density of productive stalk of 226 pieces / m2 and an ear productivity of 1.800 g. Winter barley has a high tillering ability. The maximum value of the coefficient of productive bushiness – 4,80 and 3.25 was noted when sowing the barley on August 20
166 kb

ANALYSIS OF SEED PRODUCTIVITY OF ALLIUM GUNIBICUM IN THE CONDITIONS OF INTRODUCTION

abstract 1511907008 issue 151 pp. 73 – 84 30.09.2019 ru 243
As the result of introduction research of Dagestan endemic Allium gunibicum under mountain conditions seed productivity variability data were obtained. An analysis of the data revealed significant difference in seed productivity performance of samples (inflorescence mass, seed mass, mass of 100 seeds, fruit number, ovules number, number of seeds, percentage of fruit bloom, seeds formation coefficient) among themselves both within one-year research and annually. The analysis showed that under the introduction with the same conditions the mean values of seed productivity characteristics decrease together with increasing of the sea level of collecting locations; at the same time, a mass of 100 seeds increases. The most variable factors were found out. They are seed mass in inflorescence, seed number in inflorescence, seeds formation coefficient. And the steadiest factors are a percentage of fruit bloom and mass of 100 seeds. As the result of the one-way analysis of variance a significant influence of the altitude above the sea level and slope disposition were discovered
148 kb

IMPROVING THE EFFICIENCY OF AGRICULTURE SYSTEMS IN THE KRASNODAR REGION

abstract 1511907010 issue 151 pp. 104 – 115 30.09.2019 ru 204
The article considers the existing system of agriculture in the Krasnodar region. We also give the soil-climatic characteristic of natural-agricultural zones. There was studied the structure of agricultural landscapes of the region. It is concluded that in the agricultural production of the Krasnodar region approach to agriculture is focused only on zonal methods of land management, planning and organization of large agricultural enterprises. Whereas, the Land reform carried out in the Russian Federation since the 90-ies of the last century has made significant adjustments, both on domestic political and socio-economic relations in the life of society, and on land management provision of agriculture. Redistribution of agricultural land, the formation of new scientific approaches to farming systems, based on the principles of sustainability and self-regulation of agricultural landscapes, device of crop rotations, adapted to local climatic conditions are aimed at the reproduction of soil fertility and a positive balance of humus. In this regard, there were developed the proposals and calculated technical and economic indicators for the transition to a new, effective, scientifically based, adapted to local agricultural landscape conditions, high-tech balanced farming systems. According to developed proposals and recommendations, there was given the example of application in crop ten-field crop rotation for the central zone of the Krasnodar region, which is balanced in humus
229 kb

NEW HYBRID FORMS OF GRAPES OF TECHNICAL DIRECTION OF ANAPA ZONAL EXPERIMENTAL STATION OF VITICULTURE AND WINE-MAKING BREEDING

abstract 1511907014 issue 151 pp. 130 – 137 30.09.2019 ru 234
The creation of high-quality grape varieties of domestic breeding is relevant in order to successfully import substitution. The purpose of these studies was to isolate and study the hybrid forms of the technical direction for the creation of promising high-quality grape varieties of domestic breeding, tolerant to phylloxera and with high quality wine-making products. The objects of research were the breeding forms of grapes of the technical direction, growing in on the hybrid section AZOSViW - a branch of the FSBSI NCFSCHVW. The studies were performed using modern and generally accepted programs and techniques. The selection of elite forms according to a complex of attributes based on many years of field and laboratory research is one of the main stages of the selection process. As a result of studying the potential of hybrid forms of grapes, the selection of AZOSViW of the technical direction highlighted the hybrid forms of grapes to the elite: III -59-21, III - 62-9, with good quality of final products and tolerance to phylloxera. The article presents a brief description of selected elite forms of grapes. The selected hybrid forms belong to the early-medium term of ripening, accumulate a high concentration of sugars and have an average cluster weight greater than that of the control variety called Krasnostop Anapa
165 kb

ASSESSMENT OF QUALITY OF BAKING WHEAT BREAD WITH ADDITION OF FLOUR OF SORGHUM GRAIN

abstract 1511907016 issue 151 pp. 193 – 199 30.09.2019 ru 152
The article presents organoleptic and physicochemical characteristic of baking wheat bread with 25% addition of flour of sorghum, and also wheat flour
243 kb

OPTIMIZATION OF WHEAT GRAIN PROCESS GERMINATION CONDITIONS

abstract 1511907017 issue 151 pp. 200 – 210 30.09.2019 ru 192
The article discusses the need to control the technological parameters of wheat germination. A method of intensification of this process is proposed by pretreatment of grain with ultrasonic effect using the ULTA-0.63 / 22-OL apparatus UZTA-0.63 / 22-OL, Biysk. We have evaluated various modes of ultrasonic processing of the grain and their effect on the germination energy and the total number of nested and sprouted grains. We have also conducted optimization of grain processing conditions during germination. Based on the technological capabilities of the device and the optimal modes of ultrasonic exposure, the following exposure parameters were determined: 340 W and 5 minutes of exposure (soft wheat grain) and 397 W and 6 minutes of exposure (grain of durum wheat). The authors note that the intensification of this process significantly depends on varieties and qualities of wheat grain, since the process is complex and depends on many parameters. The use of ultrasonic treatment allows intensifying the soaking process and reducing the duration of this technological operation up to 6 hours for both samples of grain of soft and durum wheat. At the same time, for the necessary moistening of the grain, a ratio of water and grain for 1: 1 is sufficient, since there were no significant differences in the intensity of grain moistening
134 kb

ASSESSMENT OF THE GREENERY CONDITION AND VOLUME-SPATIAL STRUCTURE OF PETROVSKII PARK OF PETROZAVODSK

abstract 1511907018 issue 151 pp. 211 – 220 30.09.2019 ru 294
The article covers the results of the greenery inventory and landscape-planning structure analysis of Petrovskii park of Petrozavodsk. The features of modern park planning and positional application of trees and shrubs in various types of park and garden stands are described. In the park there were found 47 species of arboreal plants, their distribution by quantity and by different categories of viability was presented. The result of the trees and shrubs condition assessment in this park stated that 63,6% of plants are in good condition, 33,2% of arboreal plants are weakened and seriously weakened, and 3,2% are in unsatisfactory condition and appear to be shrinkable and dead standing. The analysis of the park structure and stand condition allows to offer plant renovation activities
156 kb

SUBSTANTIATION OF OPTIMAL PARAMETERS OF RESOURCE INTENSITY OF PRODUCTION AND TECHNOLOGICAL PROCESSES IN INDUSTRIAL FRUIT GROWING AND SUSTAINABILITY LIMITS OF AGROCENOSISES UNDER ANTHROPOGENIC INFLUENCES

abstract 1511907021 issue 151 pp. 244 – 254 30.09.2019 ru 167
This article is devoted to the definition of criteria for the functioning of agrocenoses. It is determined that the functioning of agrocenoses largely depends on the resource potential: used ecological zones, applied technologies, technological operations and regulations. The basis of effective reproduction and sustainability of agrocenoses is the optimal balance of resources used. The work purpose is the substantiation of optimal parameters of resource intensity of the technological processes in horticulture and the determination of the limits of sustainability of agrocenoses under anthropogenic influences. The integrated assessment of resource intensity of production and technological processes in industrial fruit growing for optimization of its parameters of resource intensity is given. The optimum of reproduction possibilities and limits of stability of agroecosystem components in comparability with the level of technogenic load is achieved by means of regulation of permissible anthropogenic loads in separate elements of agroecosystem and resource balance of elements and processes. The limits of sustainability of fruit agrocenosis under anthropogenic influences are substantiated as well. Regression dependences on technological processes in the context of certain types of resources used are established: capital (depreciation), turnover (material consumption and coefficient of consolidation) and labor (wage). The complex coefficient of efficiency of the economic mechanism of resource saving is defined. The article substantiates optimal parameters of resource-intensive production and technological processes in industrial horticulture. We have also calculated the normative value of the total index of resource intensity of technological processes
284 kb

THE INFLUENCE OF APPLE-TREE CROWN FORMING ON THE FRUIT QUALITY IN THE CONDITIONS OF THE FOOTHILL ZONE OF THE KRASNODAR REGION GARDENING

abstract 1511907023 issue 151 pp. 255 – 264 30.09.2019 ru 294
The article presents the results of studies on the influence of the conditions of the foothill horticultural zone of the Krasnodar region and the crown shape on the agrobiological characteristics of the growth and fruiting of apple trees of the Idared and Renet Simirenko varieties. The objects of the study are Idared and Rennet Simirenko, trees of winter apple varieties, grafted on MM 106 rootstock. Trees were planted according to the 5 × 3 m scheme; crown width 2.0 ... 2.5 m. Orientation of rows from east to west. The garden is located on the northern slope with a slope of 3 degrees. The scheme of experience: option 1 - sparse-tiered crown (control); option 2 - flattened crown. In the experiment there were 2 options, in each option 10 typical trees were taken. Repetition: tree - plot. The location of the experiment is the Abinsky district of the Krasnodar region. Agricultural records of growth and fruiting of apple trees were carried out according to generally accepted methods, statistical processing of research results was performed by the method of variance analysis described by B. Dospekhov. The results of our studies showed that when flattening crowns, the variety Idared increases the average weight of apples by 22.9%, the yield of fruits of the highest and first grade by 43.6%, the intensity of integumentary coloring of fruits in the peripheral zones increases by 1.44, and in the center crowns 2.7 times, compared with sparse-tier crowns. In the variety Renet Simirenko, the fruit weight increases by 8.9%, the yield of the highest and first grade fruits by 14.6%, the number of fruits with color by 18.7%. Thus, in apple orchards with a 7 x 4 m planting pattern (on MM106 stock) under the conditions of the foothill horticultural zone of the Krasnodar region, flattened tree crowns should be formed for the Aydared variety (aged 14-15 years), which significantly improves the quality of the products
Life Sciences
353 kb

GROWTH, DEVELOPMENT OF BULLS IN THE CONDITIONS OF YAKUTIA WHEN INCLUDING MINERAL FEED ADDITIVES IN THEIR RATIONS

abstract 1511907005 issue 151 pp. 46 – 55 30.09.2019 ru 241
The article presents the results of a study of the features of growth and development of young bulls in the conditions of Central Yakutia when mineral feed additives are included in their rations. The scientific experience was carried out on the basis of the cattle-breeding farm "Churapcha". For the experiment were selected bullhead Hereford breed at the age of 7 months. Experimental groups of animals were formed by the method of analogues. Such indicators as age, live weight, fatness, physiological state were taken into account. The control group of bulls received the main ration. In comparison with the control group, analogs with I experimental group, in addition to the basic ration, received zeolite 0.5 g / kg body weight, 150 g sapropel and 0.04 g potassium iodide. The animals of the II experimental group received, in addition to the basic ration of zeolite hongurin, at a dose of 0.7 g / kg body weight, 200 g of sapropel with 10 g of copper sulphate. The duration of scientific experience - 7 months. Studies have shown that the addition to the diet of mineral feed additives has influenced the growth and development of bulls. So, when the age of 15 months was reached, according to the compactness index, the bulls of the control group were slightly inferior to their peers by 0.9 % compared to the first experimental group and 5.8 % to the second experimental group. According to the massiveness index, gobies of the I and II experimental groups exceeded the gobies of the control group by 0.5 % and 0.3 %. Upon reaching the age of 15 months on the index of compactness, the bulls of the experimental groups had the best indicators
205 kb

THE RESULTS OF USING THE METHOD OF TRANSPLANTATION OF EMBRYOS AT “KUBAN” AGROHOLDING COMPANY

abstract 1511907009 issue 151 pp. 85 – 103 30.09.2019 ru 312
The article presents modern methods of biotechnology used in dairy cattle breeding to increase the highly productive herd on the example of one of the farms of the Krasnodar region. The embryo transplantation method is described in detail, and a complete scheme of embryo flushing and transfer is presented. Requirements for donors and recipients, as well as for hormonal stimulation of superovulation, high-quality embryos are described. In the example of a three-year use of embryo transplantation in Agroholding Kuban company, the results are given on the number of dairy breeds of black-and-white Holstein cows, milk yield, and the quality indicator of milk. The article also proves economic efficiency
15279 kb

COGNITIVE INFORMATION-MEASURING SYSTEM FOR QUALITATIVE DETERMINATION OF FAT AND PROTEIN IN COW'S MILK IN THE PARAMETERS OF CENTIGRAMS OF DYNAMIC SURFACE TENSION AT THE INTERFACE OF MILK/AIR

abstract 1511907015 issue 151 pp. 138 – 192 30.09.2019 ru 260
A number of authors (Milaeva I. V., Zaitsev S. Yu., Dovzhenko N. A., Tsarkov D. V., Tsarkova M. S., 2015) have proposed a regression model and a method for indirect measurement of fat and protein content in cow's milk by its dynamic surface tension, which has a number of advantages over the traditional approach. The model reflects the objectively existing relations between the content of fat and protein in cow's milk and parameters of centigrams of dynamic surface tension at the interface of the milk/air. These relationships are revealed by the authors of the method wit mathematical processing of 112 empirical samples. For this purpose, they have applied regression and correlation analysis (in MS Excel). Since the content of fat and proteins in milk largely determines its quality, this problem refers to the problems of qualimetry. However, this problem of qualimetry also refers to typical problems of pattern recognition (multi-parameter typing and system identification), and therefore it is possible that the quality of its solution can be improved by the use of artificial intelligence methods, in particular cognitive and information technologies. Moreover, these relationships are quite complex. The use of intelligent technologies also creates additional opportunities for the study of the simulated subject area by studying its model. All this is of great scientific and practical interest for both researchers and practitioners. To solve all these problems in the work we have applied Automated System-Cognitive analysis (ASC-analysis) and its software tool which is an intelligent system called "Eidos". A numerical example based on real data has been considered in detail as well
.