Scientific Journal of KubSAU

The creation of machines and tools of new generation, which represent high-efficiency, highperformance and take less energy and metal is a global challenge for the modern science. In this article, based on numerous studies, it is proposed to use the effect of oscillatory motion in the working body of tillage, improving the design of tillage machines that aims to reduce metal consumption, energy intensity and improve quality of work. A new tillage working body, running in a horizontal plane and having special tabs (blades) allowing it to make a reciprocating rotational motion has been presented. The application of this working body provides agronomic, environmental, energetic and economic efficiency by trimming the layer of the soil and root system of weeds, crumbling soil layer during its interaction with the working surfaces of the blades. Due to the reciprocating rotational motion, the cleaning of the working body is observed. The constructive and technological scheme of the working body and the scheme of forces acting on the proposed working body at the moment of penetration and the rotation of the working body at a certain angle are offered. The conditions for the reciprocating rotational motion of the working body are obtained as well as differential equations allowing considering the process of movement of the working body. The article also reveals expressions for the elementary forces acting on the surface of the blade from the moving layer of soil

The use of resource-saving technologies for cultivation of basic crops does not make sense without the use of microelement fertilizers, biologics and growth regulators. All this fully applies to the technology of cultivation of the main bean culture – pea. In the current market conditions of agrochemical products, microfertilizers are presented in a wide range. Identifying the most effective of them at a price and yield increase is a defining task for agricultural producers. In this connection, the purpose of the research was to study the influence of biologics and growth regulators on the development and productivity of peas with the definition of their most effective them. The studies were conducted in 2014-2016 on the fields of the training and demonstration center on the introduction of resource-saving technologies of the IPCC APK VO "DGAU" in Zernograd, Rostov Region. As the studied drugs there were used Rizotorfin, Extrasol, Vigor Fort, Miwal Agro, Flavobacterin, Biogumat Kubansky, KU-8 Agrofon. As a result of the research, it was established that all the preparations studied showed a positive effect on the development of pea plants grade Angela. The yield gain was 0,34-0,56 t/ha in comparison with the control. The most effective are the following ones: Extrasol with a yield increase of 0,56 t / ha (14,6%) and a profitability level of 232%, Mival Agro – 0,54 t/ha (14,1%) and a profitability level of 192%, Biohumat Kuban – 0,55 t/ha (14,3%) and the level of profitability of 271%. A good level of profitability was noted at KU-8 Agrofon – 224%

The article presents the research results on parameters optimization of technological line for loading tobacco leaves into containers. The aim of the research was decreasing labor expenses on preparing tobacco for artificial curing. This was achieved by line modernization utilized for loading tobacco leaves into containers. We have also developed working parts of technological line for automatic loading of tobacco leaves into containers. Researches on weight studying of tobacco leaves of 3 sorts zoned in the Krasnodar region have been carried out. Dispersion analysis has not revealed weight differences between sorts, therefore, further researches can be carried for one sort. Optimization of working part for loading tobacco leaves into containers was carried by analysis of regression equation obtained by bifactorial experiment. Irregularity of leaf position was taken as optimization criterion. It has been discovered that optimal regimes: transporter belt speed v=2,8m/s, number of transporter’s double movements n=19 min-1 can be used for uniform container loading by leaves. Researches on studying line capacity on leaves position irregularity revealed that maximal uniformity obtained when line capacity is 260 kg/h

The article presents results of studies of the present state of mechanization of tobacco harvesting. The aim of the research was to assess the state of the technical equipment of the tobacco farms in the current economic conditions. We have performed an analysis of the technologies of harvesting tobacco. Main problems of harvesting tobacco leaves were shown. We have analyzed the main constructive scheme of tobacco harvesters used for different technologies of harvesting tobacco leaves. The article gives main advantages and disadvantages of the applied technical solutions and lists tobacco harvesters used in foreign tobacco farms. A disadvantage was the impossibility of adaptation to the domestic types of tobacco. In the end, we have developed a project for solving scientific and technical problems of complex mechanization of technological processes of preparation of plantations to drying process, carrying out machine harvesting and preparing tobacco leaves harvested by the machine. This involves three stages. This will solve the problem of insufficient technical equipment of production of raw tobacco

The technology of cultivation of most crops provides pre - and post-emergence weeding of crops, and their feeding with the availability of soil nutrients. According to the used underlying technology, these operations are performed separately. The harrowing of crops after germination is necessary for weed control, the destruction of the soil crust for access of air to the root system and partial thinning of dense crops. Further destruction of weeds on crops are herbicides, high-quality entry which provide sprays. The latter can provide small and ultra-low volume spraying in high performance and environmental requirements. However, separate execution of technological operations for fertilizing and harrowing reduces the quality of work, increases the cost of production. The proposed combination of technological operations on a harrowing of crops different crops simultaneously with feeding plants solid mineral fertilizers. The combination of technological operations for one pass of machine-tractor unit in the field provides a reduction of the fleet, its capital intensity, the energy, cash costs, and hence competitiveness of products. The studies proposed new technical support processes, technological scheme of the multifunctional unit to combine the operations of feeding and harrowing of crops

The article describes the purpose, the device, the technological process of work, and also the justification of the parameters and operating modes of the sorting nozzles of the seed separator by weight, dividing individually the seeds of agricultural crops according to their individual weight, thus ensuring the selection of seeds with a large supply of nutrients, the energy of germination and the growth force contributing to the formation of the crop

Issues related to the contamination of crops are topical and very relevant. All this fully applies to the main crop produced in the South of Russia – winter wheat. In this regard, the presented results of studies of the influence of predecessors and tillage technologies on the development of weeds in the cultivation of winter wheat are relevant. Experimental studies were carried out in conditions of many years of experience located in the FEDERAL state scientific institution «ANTS «Donskoy». The influence of different methods of sowing (ordinary, scattered, belt) and technologies of tillage (dumping, non-dumping, surface, small) on infestation of winter wheat is considered. It is established that the least amount of weed plants is provided at scattered sowing on the background of deep tillage. The main treatment at a depth of 18-20 cm reduces the number of weeds by 47% in comparison with the surface (8-10 cm), and the scattered sowing reduces their number by 80%, since weeds are in more severe conditions compared to winter wheat, the rapid development of which contributes to the optimal nutrition area. Of the predecessors, the most acceptable is the steam with the number of weeds 7-25 PCs / m2, which is several times less than after peas, or corn after silage

Winter wheat is very demanding on the nutrient regime of the soil. Like many winter crops, it consumes the nutrients unevenly distributed during the vegetation period, which must be considered when making them. Modern varieties of winter wheat are very demanding to soil fertility. For the formation of 4,0-4,5 t/ha requires about 140 kg of nitrogen, 50 kg phosphorus and 120 kg potassium. Therefore, without the use of fertilizers, it is not possible to obtain such a crop with high grain quality. In addition, in the cultivation of winter wheat in the high and intensive technologies simply need using large amounts of fertilizer to compensate for the removal of nutrients. This is especially important when having partial or complete reduction of application of organic fertilizers. Therefore, we consider the possibility and the results of studies using different doses, combinations and types of fertilizers in technology of winter wheat cultivation. Experimental studies were carried out in the conditions of insufficient and unstable moistening of southern zone of Rostov region, on experimental fields of the federal state scientific institution «ASС «Donskoy». For research, we have chosen the most common varieties of winter wheat (Tanais, Granite, Axinite, Terra, Donskoy prostor, Motto) and various combinations and combinations of mineral and organic fertilizers. The experiments were conducted on two predecessors: couples and peas. As the controllable parameters we had the productivity and quality of winter wheat. We have found a positive impact of the in-change of fertilizer on the studied parameters with a share of the variance of 96% and a high degree of correlation of 0,98. The marked increase in the productivity of winter wheat is up to 22% when using different versions of the experiment. We have identified rational combination doses of mineral and organic nutrition for predecessors: peas N40P60K40+2N30 and vapor – manure 40t/ha+2Р60+2N30

The tasks set in "The strategy of engine and technological modernization of agriculture until 2020" provide growth of labor productivity by 3–4 times. In our article, we have attempted to concretize in a zone sectional view the direction action for successful engine and technological modernization for the purpose of implementation of such strategically important point. Radical modernization of system of vehicles for complex mechanization of field husbandry based on the domestic equipment in relation to natural and technological conditions of the Krasnodar region is offered. Realization of system of transport is supposed with use of the equipment of the fourth generation, but in 2020 the equipment of the fifth generation and innovative processing methods for production of grain crops has to be realized. It is noted that the solution of such task without the state participation is impossible. The fundamental principles of improvement of system of vehicles for field husbandry and engine technologies are offered. The main of them is a new system of mobile power, new highly productive motorless grain - beetroot-, forage harvesters, new multipurpose units with the offered devices for combination of the technological operations changing labor-intensive technologies radically. We offer replacement of heavy tractors, self-propelled combines; cutting-down of the nomenclature of the equipment at the expense of multipurpose units, main application of fertilizers along with processing of the soil, drop of sealing of the soil and its dispersion. The offered technical re-equipment of branch will provide precision performance of operations, increase in labor productivity and economy of resources

Currently in the South of Russia, the most acute problem of accumulation and preservation of productive moisture in arable layer of soil. This fact has a decisive influence on the yield of agricultural crops. The need to study the dynamics of accumulation of moisture of the treated soil due to the fact that at the first stage of development plants are very sensitive to moisture content in the rooting zone of the soil. Practically the regulation of the moisture content of the processed layer may correct the influence of soil tillage aggregates with different types of working bodies. The work was performed in FSRI of the «ASC «Donskoy» (Zernograd, Rostov area), in the conditions of stationary experience (4,3 ha), 2013-2015, where explores various technologies of soil treatment, including no treatment. To obtain comparable results the same selected set (rotation) of crops (winter wheat, spring barley, pea, vapor). As a result of researches it is established that on steam background (76,1-46,2 mm) content of productive moisture is more than two times higher than on other backgrounds (of 30,6-46,2 mm). This allows us to talk about the effectiveness of the fallow field from the point of view of accumulation of moisture. The analysis of statistical data allows making a conclusion about the impact of crops on the dynamics of productive moisture. On the other hand, the rating statistics of the received data with backgrounds treated with different technologies did not allow to find significant advantages to any of them, as the area under the curve ROС analysis does not exceed the value of 0,6. Therefore, the studied backgrounds in the period of the research have equal influence on the moisture content of the treated soil layer