Scientific Journal of KubSAU

The role of transport in agricultural production is considerable. It is a connecting link in a single technological chain of the agroindustrial complex of the country (RF AIC). In intraeconomic transportation in the RF AIC, along with cars, we widely use tractors. Rational application of wheeled tractors in intraeconomic carriage substantiates the possibility of their movements both on asphalted and dirt roads. A specific share of tractor transport in domestic agriculture amounts 22-27% of the total transport transportations and 50-60% of intraeconomic carriage. There is a high level of the usage of tractor transport in Western European countries and in the United States. In farms of leading Western European countries (Germany, Italy, France and others.) there is about 70-90% of intraeconomic carriage performed by tractor transport. One of the most substantial and difficult tasks is to fight with damage and losses of agricultural production, in which a very responsible role has been assigned to automobile and tractor transport as an important link in the AIC. According to the analysis of materials for the preparation and use of potatoes and apples, more than 15-20% of the products do not reach the consumer. Low quality of the use of vehicles during transportation is a problem. Transport costs in the prime cost of produced products in rural areas reach 30-40% or more. Lowering them will further influence the development of the agroindustrial complex. Thus, the creation of new of scientifically grounded decisions in designs of vehicles for intraeconomic carriage that enhance preservation and performance of potato harvesting and apples in the conditions of Russia's AIC is the actual scientific and technical task. Its solution makes a significant contribution to the development of the country, as well as it contributes to the implementation of breakeven, competitive manufacture

This article discusses the results of the studies of faculties and staff of Ryazan State Agrotechnological University named after P.A. Kostychev, confirmed with RF patents

The research results presented in this article are intended to familiarize themselves with promising avenue to improve the quality of potato harvesters by improving the process of separation, as well as working bodies for its implementation

While mechanical harvesting of potatoes, about 20-40% of the tubers get damages. Dynamic loads, injuries of the tubers, causing internal damage – which is browning of the flesh of the tuber, which occurs in the process of its storage. At the same time, ways to express control of damage to potato tubers will allow both reducing damage during harvest, and promptly sending damaged potatoes for recycling before the results of mechanical stress for the tubers during harvesting. The definition of internal damage to the potatoes is possible because of the analysis of the different elasticity of the tissues of damaged and undamaged tubers. The value of overpressure of the device is chosen such way that during deformation of tubers there mainly has been compression of the damaged tissues of the tuber, with the least turgor. The degree of damage of samples of tubers is determined by the ratio of the volume of damaged tissues of tubers to the total volume of the sample. We have given the mechanical properties of tissues of tubers, fruits and root vegetables, their structure, dimensional characteristics, it can be assumed that the use of this method of determining internal damage possible for apples, carrots, beets and harvest of other crops. Use of damage control will enable timely identification of hidden damage and make it possible to eliminate their causes, which lead to increase loss products

Fruit harvesting is the final and decisive operation in the general work plan for growing fruit, which largely determines the qualitative and quantitative indicators of production and economy of industry in general. Increasing productivity by improving the safety of fruits and vegetables is a priority and not an easy task. For example, the use of cleaning technologies with the use of machinery for harvesting of apples by shaking can significantly reduce the time of gathering fruit compared to hand harvesting. This technology may be applicable, if the fruit is grown for the manufacture of juices, jams, etc. Currently, in several European countries and in the USA, they widely use fruit harvesting platforms and machines. The leader in the production of fruit harvesting platforms is Italy. To reduce the damage to fruit in agriculture, the analysis of the traumatic factors is of great importance, with the analysis of available machines and their subsequent modernization with the aim of improving the reliability and quality of harvesting and transport process, taking into account of the algorithm for solving these problems, the creation of new varieties of fruits and vegetables suitable for machine processing, strict compliance with deadlines and agronomic requirements for the performed technological operations, taking into account the savings of energy and resources when using mobile technology. In addition to the modernization of the machines for efficient operation, it is necessary to improve also the scheme of planting of gardens and methods of cultivation, transfer horticulture to intensive way of development

Based on the previous investigations we have underlined the need to increase fruit and vegetables preservation quality while transporting them from the producer to the consumer at the expense of improving the road transport operation for its intended purpose. We have made a conclusion about the need to develop strategies for maintenance and repair as for the actual technical state at the expense of developing the diagnosis system based on the development of a math model of changing the technical state of the diagnosis object, developing a method of rational set of objects to be diagnosed and determining the technical state optimal control frequency. We have confirmed that the above mentioned is possible when considering the system of technical operation of road transport as an organization-production system and applying the engineering-cybernetic approach to improve this system. We have considered the basic requirements for the efficiency indexes when investigating and improving the operation system that will allow achieving the aim we have had and can be described mathematically. We have made a conclusion about the urgency of the issue we studied and the possibility to develop the efficient operation system of road transport based on the provided criteria

The transportation process plays an important role in the delivery of agricultural products to the consumer. On how well the fruits are preserved, their grade will depend, and, consequently, the price of them. It is known, that the annual damage from losses of agricultural products in the agro-industrial complex amounts to 8 billion rubles, according to various estimates. A large number of different factors affect the safety of fruits during transportation: temperature, humidity, smoothness of the vehicle, type of container, etc. The more factors will have a negative impact on fruit and vegetable products, the more losses will ultimately be. The appearance of dents and abrasions on the fruits gives rise to the formation of foci of rot, leading to damage to the transported products, and, as a consequence, reducing the grade. In order to reduce the losses of fruit and vegetable products in the process of transportation, the USSR and the Russian Federation have been and are working on the creation of containers and ways of transporting pomegranates. All of them, according to the authors, are able to reduce the dynamic loads that arise during the transportation process and have a negative impact on the transported products. However, due to various circumstances in commercial gardening all these developments have not been extended

In the article we have analyzed the results of measurements of pressure of gases in the combustion chamber and the fuel pressure at the inlet injector diesel D-243 at a processing frequency (acoustic and electromagnetic) fuel 17 kHz

In the article we have proposed a program, an object, a methodology and results of field studies of the improved potato digger KTN-2V equipped with the original device for separation intensification

In this article, contact conditions are investigated at superficial plastic deformation by running-in rollers of details by a method of load cells