Scientific Journal of KubSAU

The article has developed the device for non-contact distance measurement, which effectively terrain surface with no mechanical contact with her, just maintaining the distance from the cutting unit to the soil surface

This article discusses the results of the studies of faculties and staff of Ryazan State Agrotechnological University named after P.A. Kostychev, confirmed with RF patents

In the article we have proposed a program, an object, a methodology and results of field studies of the improved potato digger KTN-2V equipped with the original device for separation intensification

In the article we have analyzed the results of measurements of pressure of gases in the combustion chamber and the fuel pressure at the inlet injector diesel D-243 at a processing frequency (acoustic and electromagnetic) fuel 17 kHz

The article analyzes the results of the evaluation of the filter element of the filter of thin clearing of fuel on the basis of the change in pressure in the common rail fuel supply system depending on mileage

Modern condition agricultural transport (a significant part of it about 70%) is characterized by a strong deterioration of the rolling stock, the unsatisfactory state of the production base. More than 30% of vehicles operated outside the normative service life, the rest approaching to that state. In general, the provision of agrarian and industrial complex with agricultural vehicles is way below agrotechnical requirements. In the long term, farm machine engineering should focus on indicators of the technical level achieved by best samples of foreign agricultural machinery. Priority development is likely to receive the development of innovative technologies that provide a significant increase in productivity, efficiency and resource conservation in agriculture. To address the shortcomings of transport services agrarian and industrial complex we should improve transport technology with the use of transport logistics, expand and update the existing vehicle fleet, but due to the low solvency of agricultural companies and high prices for of automotive engineering, the problem of providing agricultural vehicles becomes most acute. Thus, the creation of new science-based solutions in technology and engineering for transportation farm produce in terms of Russia's AIC is the actual scientific and technical task that contributes significantly to the development of the country, as well as enhances the enjoyment of breakeven, competitive manufacturing

Based on the previous investigations we have underlined the need to increase fruit and vegetables preservation quality while transporting them from the producer to the consumer at the expense of improving the road transport operation for its intended purpose. We have made a conclusion about the need to develop strategies for maintenance and repair as for the actual technical state at the expense of developing the diagnosis system based on the development of a math model of changing the technical state of the diagnosis object, developing a method of rational set of objects to be diagnosed and determining the technical state optimal control frequency. We have confirmed that the above mentioned is possible when considering the system of technical operation of road transport as an organization-production system and applying the engineering-cybernetic approach to improve this system. We have considered the basic requirements for the efficiency indexes when investigating and improving the operation system that will allow achieving the aim we have had and can be described mathematically. We have made a conclusion about the urgency of the issue we studied and the possibility to develop the efficient operation system of road transport based on the provided criteria

Due to the deterioration of the ecological situation in the world, population tends to eat organically grown foods that are grown either without or with minimal use of chemicals. The development of agriculture in this direction leads ultimately to organic agriculture. To improve the competitiveness of this direction, we need more effective agricultural machines, especially in the last phase of cultivation, namely at the stage of harvesting. One of the most difficult scientific and technical problems with the mechanical harvesting of potatoes is not letting vegetable impurities and tops to fall down in the hopper with the potato tubers, which among other things will improve operational efficiency technology. The article reviewed the various methods for removing the tops, as well as their advantages and disadvantages. The article makes a conclusion about the need for potato top separators in harvesting machines. We have also considered a promising device for removing haulm, a conveyor with flexible fingers on the bars and the clamping beater. Тhe most short-lived structural element of the device for removing haulm, reducing reliability of the device, is flexible fingers mounted on rods. We have proposed to use polyurethane as a material for manufacturing flexible fingers

In recent years, in many countries around the world, much attention is paid to the issues of ensuring of rational use of energy resources, due to a number of objective factors, chief among which are: the lack of own energy resources to meet domestic energy needs; the sharp increase in the cost of production and the production of energy resources; further growth in energy needs; the presence of large potential opportunities to reduce unproductive losses of fuel and energy. In the world, the challenge now is to ensure a gradual but steady transfer of the economy on energy saving way of development. To achieve the goal of reducing energy costs we might use two ways: firstly, the widespread introduction of energy saving technologies, and secondly, the reduction of material production, improving its quality and service. In agriculture, the improvement of the technological process can be carried out using new tillage methods, improving the organization of production and tools. Further development of mechanization in agriculture will contribute to further growth of electrification in the agricultural sector, which will significantly reduce the use of the most expensive and limited energy resources. The article offers a technique of the estimation of the efficiency of consumption of energy in agricultural production. In order to compare the efficiency of machines in the cultivation and harvesting of potatoes, there was conducted an energy assessment of the operations of modern technology. As variables, there were investigated different operation modes of the machine: working speed and working width, depth of stroke of the working bodies. In the process of evaluating energy operations, modern technology to prepare the soil for planting potatoes was determined humidity, mechanical composition and soil type. As a main factor in the analysis of technological methods, we have taken the overall specific energy consumption and specific energy consumption for the digging below tuber formation. Analysis of theoretical researches of agricultural machinery has led to the conclusion that the energy cost of implementing the technological process in the machines of different designs varies

While mechanical harvesting of potatoes, about 20-40% of the tubers get damages. Dynamic loads, injuries of the tubers, causing internal damage – which is browning of the flesh of the tuber, which occurs in the process of its storage. At the same time, ways to express control of damage to potato tubers will allow both reducing damage during harvest, and promptly sending damaged potatoes for recycling before the results of mechanical stress for the tubers during harvesting. The definition of internal damage to the potatoes is possible because of the analysis of the different elasticity of the tissues of damaged and undamaged tubers. The value of overpressure of the device is chosen such way that during deformation of tubers there mainly has been compression of the damaged tissues of the tuber, with the least turgor. The degree of damage of samples of tubers is determined by the ratio of the volume of damaged tissues of tubers to the total volume of the sample. We have given the mechanical properties of tissues of tubers, fruits and root vegetables, their structure, dimensional characteristics, it can be assumed that the use of this method of determining internal damage possible for apples, carrots, beets and harvest of other crops. Use of damage control will enable timely identification of hidden damage and make it possible to eliminate their causes, which lead to increase loss products