The article proposes an approach to constructing a
methodology for modeling managerial situations in the
construction of real estate objects using a hierarchical
system and choosing a developer company to be
charged with the construction of real estate. A
comprehensive methodology has been developed on
the basis of which it is possible to forecast problem
situations that arise during the construction of a real
estate object and conduct a scientifically valid choice
of a developer company
The debate continues about reform of higher education
In the country. We offer our point of view regarding
the preparation of bachelors and masters on the
direction of "Control of the technical systems".
Department of automatic control systems leverages
variable disciplines of specialization and optional
subjects, forms a curriculum based on the needs of the
business environment of the region or commissioned
by a separate large enterprise. Students participate in
the modules of project activities, form new and
effective engineering solutions, to get skills of their
practical implementation with regard to effectiveness,
relevance and prospects of their further development.
The production practice is very important in the
preparation of bachelors and masters. To this end, the
agreement on cooperation in the field of improvement
of quality of preparation of students of SFedU
concluded with the company RealLab (www.rlda.ru).
It has allowed undergraduates to pass a work practice
at the enterprise, custom-making thematic tasks of the
enterprise on a contractual basis. Graduates of
magistracy successfully find a job at the enterprise,
providing thus strengthening of personnel structure. In
this study, we propose a technique of teaching of
bachelors and masters in "Control of technical
systems". The main thesis is to use the technique of
through projecting throughout the entire learning
process. The trajectory of training is built for the
student based on a module of project activity, training
and production practices. The student studies the
object, develops the control algorithm, programs it,
chooses a set of technical means throughout the entire
period of training with an exit to the protection of the
final qualifying work
This article analyzes the best practices of choosing the
optimal policy for replacement of vehicle fleet. The
problem of replacement equipment was revealed. For
each of these methods we gave objective function,
constraints. We have found the best method of optimal
plan of replacing the vehicle fleet in the company,
allowing us to obtain accurate, economically viable
new equipment purchase plan during a certain period.
We have selected a number of important factors that
influence the choice of payment method replacement
policy and built PivotTable methods and factors. The
selected as part of the research methodology will
significantly reduce the labor and time, which will lead
to an increase in productivity of the enterprise as a
whole. The article gives a practical justification for the
need to address the problem of choosing the optimal
policy of replacing the vehicle fleet
In the context of implementing programs on reducing budget expenditures for the social sphere utilities, it is urgent to intrude renewable energy sources into the practice of their energy supply. However, despite all their diversity, not all constructions based on renewable energy sources can be used under conditions of urban development. Besides, the mutable nature of the solar radiation coming on the Earth's surface requires specific forecasts and calculations of its intensity. Accurate estimation of the area solar energy potential of the generating plant proposed location allows not only to justify its parameters at the design stage, but also to predict its operating mode and to evaluate its technical and economic efficiency. The purpose of the article is to estimate the level of solar radiation for Volzhsky, Volgograd Region, at the initial stage of designing and justifying the implementation of power plants transforming renewable solar energy in urban areas. In the article, it is proposed to apply method for estimating the solar energy potential of at a specific geographic point, based on a combination of the calculation method for determining the solar radiation characteristics and actinometric measurements. Volzhsky of the Volgograd Region, like most settlements in the Lower Volga region, has a high solar energy potential: 1228.8 kWh / m² for the horizontal surface of the southern orientation of the receiving surface of power plants, which can be increased by 16.2% at its optimal orientation relative to the horizon and the sides of the world. However, the expansion of the utilization of the solar energy potential of the district may be limited to the location of the existing buildings and structures at which power plants may be located in urban development conditions
The article has indicated the problem of the growth of
document organization on the example of higher
educational institution FGBOU "Kuban state
technological University". Based on years of practice,
the author conducted a detailed analysis of activity of
service of documentary maintenance of management
of the University and detailed analysis of the structure
of the document taking into account the specifics of
the direction of the organization. The article sets main
tasks of service of the DOE, the actual problems of
transition to paperless documentation of the
organization's resources. We highlight problems of
management and use of documents, due to the steady
growth of documentary information. The major
factors, influencing the growth of volumes of
documents were given. Despite the rapid development
of electronic document management in practice,
electronic document duplicates the traditional
paperwork. However, today the approach to document
management is based on electronic technologies. The
study of the author offers solutions to the general
problem of reducing the volume of document
workflow in the modern world
The object of the study was the sweet pomace of red
varieties of grapes grown in village Taman Temryuk
district of the Krasnodar region. By grinding in a
laboratory mill and drying in a drying oven at a
temperature of not above 60 ºC, a powder is obtained
from the mash. Its quantitative chemical analysis has
been carried out. The mobile forms of metals and the
total content of metals are determined. The content of
mercury, lead, arsenic does not exceed the permissible
levels of the maximum content of toxic elements in
flour confectionery products. The influence of powder
from grape pomace on the quality of the finished
product and on the properties of the pastry test was
studied, as the control sample was chosen the recipe
for the sugar cookies "Carrot". A part of the flour was
replaced with grape-dried powder in amounts of 1 %, 2
%, 5 % of the mass of wheat flour of the highest grade
in the test. The recipe of sugar cookies with the
addition of powder from grape pomace and without,
calculated on 200 g of finished product, and
organoleptic parameters of the finished biscuit is
given. It is established that the use of grape-dried
powder allows to increase the mass fraction of dry substances and to reduce the mass fraction of sugar in
confectionery products, as well as to enrich them with
mineral substances, microelements, which are
necessary for normal functioning of the organism.
Biscuits with the addition of powder from grape
pomace are a good source of ballast substances
reducing caloric content, which contributes to the
removal of harmful substances from the body:
cholesterol, heavy metal salts, etc
The article deals with the application of the theory of
regulation for the synthesis of technological mechanical
devices and their replacement by electrical or electronic
analogs in order to reduce energy processes in
soil cultivating and sowing machines
The article considers a combination of the process-based and systematic approach in the management of OSH at the enterprise for the development of the OSH management system model. The OSH management system is created by the enterprise based on the model provision, the branch requirements and recommendations of the current standards. Features of the system are determined by the state of the external and internal environment of the enterprise (context). The context forms the basic requirements for the inputs of the system and determines its capabilities. An analysis of the context of the enterprise makes it possible to identify the system: describe its inputs and outputs, identify key stakeholders and consumers. Based on this analysis, a model of the OSH management system is suggested, which, in analogy with the modern model of the quality management system, allows us to identify the place of the OSH in the context of the organization, and also to clarify the interaction of the main groups of OSH
The article presents a study of types of expert systems
(ES) and methods of their construction. We have
developed principles of functioning and the
architecture of dynamic ES for social protection that
can modify its behavior depending on the changes in
the subject area and in specified scripts of functioning
Improvement is offered for working bodies’ forms in
devices for preparation of forages by methods of
engineering geometry and computer graphics. That
opens not only great opportunities for intensification,
increase in productivity and efficiency of the
technological processes, but also opens ways for
creation of small-sized devices for their realization.
Constructive study of geometry of working bodies
surface, allows us to give wavy movement to particles
of forage and impart them the movement with bigger
power consumption. In such installations forage
particles components, meeting walls of working body,
change their direction and, meeting other portions of
particles of forage components, mix up. From loading
to unloading, throughout the installations working
body length, flexible and strong waves of forage
particles components movement inside the working
body are born. The conducted pilot studies have
shown that as a result of working bodies’ forms
improvement of devices for preparation of forages by
methods of descriptive geometry such devices can be
implemented in a variety of industries