The main direction of reducing the cost of soil
treatment based on resource-saving technologies is
the transition to surface treatment of soil with disk
tools. Double-row and four-row disc tools are manufactured.
Four-row tools significantly increase
tillage intensity. In the disk tools, the spherical disc
is fixed on the individual pole. Disc headers are
equipped with a rigid adjustment fixing the
standalone pole to the frame. Recommended operating
speed is up to 12 km/h. The advantage of a disc
header over the disc harrow is as follows: winding
plant residues on the axis are excluded. Disc
mulchers are equipped with a spiral bar on which a
spherical disk is mounted. The presence of the elastic
element allows the working unit to do lowfrequency
oscillations during movement. The result
of processing is the formation of mulch in the layer
of soil, which is a mixture of plant residues and soil
particles with a diameter of up to 25 mm. To assess
the effectiveness of the disc mulcher and the disc
header a unit is composed. The initial data for calculation
are as follows: tractor HTZ-150K, the resistivity
of the soil is 6 kN/m, disk tool working
width is 4 m, operating speed of the disc header is
12 km/h, operating speed of the disc mulcher is 15
km/h. Technical and economic performance of these
units is defined during disking the soil. The
choice of energy-saving operating regime was made
in a well-known manner. Theoretical value of slippage
of the leading tractor with disk mulcher was
6%, against 9% with the disc header. Working
speed of the mulcher made up 14.07 km/h against
10,89 of the disc header. The performance of the
unit with the mulcher made up 16.21 hectares, disc
harrow performance is 12,54 ha. Fuel mass flow of
mulcher decreased by 29% and made 9.68 kg/ha.
Using mulcher for surface treatment of the soil allows
to reduce the tillage energy costs thanks to
resource-conserving technologies
The development of agro-industrial integration is an objective economic process involving, on the one hand, with the social division of labor and specialization, on the other - with the necessity of interaction between specialized sectors and modes of agricultural production. Agrarian enterprises come into this unification movement, seeking to reduce the risk, the occurrence of which is associated with the production depends on climatic conditions, natural agricultural products market, the dictates of the processing enterprises, the need to improve the competitiveness of production. Processing and service companies are also seeking to secure a stable income thanks to the raw material base, better use of raw materials, improving the quality of its products, decreasing the price and conquering markets. In most cases, the object is to integrate agriculture, and direct or indirect initiators often are non-agricultural plants and firms that concentrate the bulk of production and sales of AIC final product. As a result, the concentration of production results in savings on its scale, so-called technical-technological economy. Increased production expands beyond the optimal use of machinery and equipment. The more spread out are agricultural producers, so it is more difficult to realize their interests for scaling up. In the Russian practice we have developed a variety of organizational forms of integration differ in the nature of economic relations between the parties, the degree of independence of members of the business combination, the combination of centralization and decentralization. Conventionally, they are divided into associative - "soft" and corporate - "hard". By "soft" forms of association include associations, unions, non-profit partnership and a strategic alliance. They can function effectively at the interregional level. Hard type of integration ties characteristic of plants, corporations, trusts, holding companies. Agricultural credit consumer cooperatives (ACCC) is a voluntary association of individuals and legal entities residing or conducting their business activities in certain rural areas, on the basis of membership and monetary union shares in order to meet the needs of the members in the credit and other banking services
The article presents the analysis of the design of an electro activator on the basis of the equivalent circuit, the dependence of the resistance in the cells at differ-ent performance. It also provides a comparison of experimental and theoretical values of resistance
Minimum tillage technology (mini till) is based on soil preparation for sowing by disk working organs. The spherical disc serves as a ploughshare and a blade and provides soil crumbling. There are two options for placement discs: a battery one on the X-axis with an individual bar. The working depth is adjusted by changing the angle of the battery attack. The distance between the tracks of the spherical discs on the common axis is 220 mm. In processing the soil with plant residues there is winding of stems on the axis which causes the disc jamming. The structural layout of the spherical disk on the individual axis with individual counter has none of these shortcomings. Spherical discs on the individual pole are placed on the frame in parallel rows. The working depth is adjusted by changing the angle of attack of each series. The number of rows on the harrow ranges from two to four. In the three-row harrow the front row is divided into two equal parts, with the working bodies being installed with the opposite direction of the bulge. The recommended working speed of the harrow is up to 12 km / h. The non-standard location of the disk of the mulcher on the spiral rack makes it possible to perform the following functions: crushing and incorporation of crop residues into soil, mulching. The number of rows of the mulcher is two or four, and the speed is of 15 - 18 km / h. The analysis of the data specifications of the harrows and mulchers with a different number of rows and different needs for the engine power of the tractor has been made. There has been determined the empirical dependence of the total number of disks upon the working width of the harrow and the mulcher. Dependence of the minimum power of the tractor upon the working width with different number of rows of the harrow and the mulcher was determined. It was found that at the same working widths, the double row harrow has the smallest value of the minimum power. At the fixed width, the double row mulcher has the highest value of the minimum power
The article compares various hypotheses that explain the mechanisms of the influence of the magnetic field with different characteristics on liquids, physico-chemical and biological systems. Physical effects that cause specific biological activity of water (magnetic treatment of water, production of thawed water, degassing, etc.) make water be metastable or non-equilibrium states. Water attracts the attention of researchers as a likely universal mediator in the transmission of electromagnetic field signals to the biological level. Water is involved in a variety of chemical and metabolic reactions, so the question about the ability to change the properties of water and solutions under the influence of fields of different nature: an electromagnetic field with different frequencies, with different combinations of field orientations (parallel constant and variable magnetic field, slope fields, rotating magnetic fields, magnetic fields close to zero and electric fields) arises. At the heart of existing methods for treating liquids lie methods that use the energy of the acoustic and magnetic fields, as well as complex methods of influencing the electromagnetic field in combination with thermal heating, pressure change, etc. The analysis of existing hypotheses about the mechanisms of the influences of fields of a different nature on the treated liquid makes it possible to put forward a hypothesis about the possibility of the joint influence of the acoustic and magnetic fields on the liquid by means of the acoustic and magnetic device
In the article, we present the analysis and improvement
of existing methodologies for assessing the
intelligence factor, taking into account its use of the
Internet on a regular basis. Today, the use of the
Internet in our daily activities and tasks become
practice that is more common. The Internet has
become a popular and most frequently used means of
obtaining information quickly and in large volume.
The authors suggested the presence of the Internet and
its impact on the everyday use of psychological and
intellectual life of the people that can be recorded
because of user IQ scores. It is suggested here also gets
its development in the search for and analysis of
system models, allowing determining the numerical
values of the parameters. Specifically, it is proposed to
use a large variety of statistical data to clarify the
unknown parameters that determine the levels of
human intelligence, taking into account the impact of
the Internet. These statistics include information such
as the number of people with higher education, the
number of Internet users, the degree of the Internet penetration in society, the most typical tasks that use
the Internet users, and others. For the processing and
analysis of the test statistics in the work proposed to
use tools data mining, ie, data mining. We have also
considered the most typical approaches Data mining,
applied in similar research areas. We have analyzed
what specific principles and methods can best
approach to solving the problems of intelligence
assessment indicators. The result of the article was a
number of conclusions, in particular, the feasibility of
applying clustering to analyze data in the field. Also,
in certain cases, we provided the use of Kohonen
neural network in the vector quantization network
format. Methods: analysis of scientific literature and
online sources of information on the current level in
the field of IQ research; modeling; Methods
systematization (tabular calculations and compilation);
Experiment (real human test data). Methodological
bases of research: a systematic approach (considering
IQ in the form of a functional multi-component
dependencies), probabilistic and statistical approach
(provides guidance for constructing mathematical
models linking together IQ and the influence exerted
on it using the Internet, and to assess the reliability of a
computer program ) qualimetric approach (determines
the need multicriterion diagnostic influence of factors
on the level of intelligence)
The article reviews the results of the analysis of technical and operational characteristics of domestic and foreign grill apparatus. The most important indicators of the apparatus are discussed
The railroad warehouse has most important role in the delivery process of fertilizers to agricultural consumers. It acts as logistics intermediaries. The analysis of material flows has been done on the example of a typical provider of mineral fertilizers in the South of the Rostov region (CJSC «Zernogradagrohimservis») for the last 6 years. Income values and implementation values are varied during the year synchronously for all fertilizers types with the exception of a few months at the beginning and the end of the year. During most of the year the enterprise operates as a negotiable warehouse. In January-February and October-December ammonium nitrate accumulates as a seasonal inventory for the spring peak of implementation, in the rest of the year its reserves are insurance. Stocks of other fertilizers types are insurance stocks for most of the year, in May-July occurs a slight accumulation of their seasonal stocks. A significant portion of mineral fertilizers (especially ammonium nitrate) is delivered for small enterprises and individual farms by cars of this provider. According to the supply contracts, a one-car-run is performed for the vast majority of customers. Routes of delivery of fertilizers are either radial or pendulum (with reverse idle mileage). Therefore, the optimization of the delivery of fertilizers does not seem possible by methods such as obtaining the shortest route network, consolidation of suppliers for consumers, etc.
The possibility of using involute sprockets, more technologically advanced in manufacturing, compared with sprockets with straight, convex-concave profile of the lug on the criterion shock resistance circuit, the maximum permissible speed of the drive sprocket for bush roller chain drives and gears with a toothed chain. The comparative analysis of researches of operation of roller and tooth chain gearings with various steps and types of profiles of sprockets showed that in all cases with increase in a step of a chain the coefficient of speed of blow increases, and the increase in number of lugs at sprockets reduces the speed of blow of the hinge about sprockets tooth. Value of coefficient of speed of blow for couple an evolvent sprockets - a gear chain is much less than value of coefficient of speed of blow for couple a plug-roller chain –sprockets of any profile. Less noise during the work of tooth chain gearings is due to evolvent sprockets. As a result of researches it is established that on kinetic energy of impact of sprockets and the hinge of a chain, sprockets with an evolvent profile can be applied on an equal basis with the sprockets having concave-convex or rectilinear profiles of lugs. Respectively, evolvent sprockets can be used both in chain transfers with roller and with gear chains
The article presents analysis of emissions to the
atmosphere in the regions of the North Caucasus
Federal District by means of visualization tools of
Tableau Public 9.0 in order to identify problem
areas and to support management decisions